Advertisement

Parts Shopper

Way Cool New Stuff

Complied by Eric Kaminsky - January 02, 2014 10:00 AM

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Image 1 of 13

GTO hinges

Replace worn out, damaged or even missing hood hinges on your 1964-1972 GTO, Tempest or LeMans with new billet pieces from Ringbrothers. Precision machined from aerospace-grade 6061 T6 billet aluminum, the hinges feature an integrated gas shock that is calibrated for either steel or fiberglass hoods. For 1964-’65 models, the hinges are a solid design (seen here). For 1966-’72 cars, there is also an air frame design as well as a solid hinge. Made in the U.S., no modifications are required for installation, and all hardware is included. Hinges are available in either a natural or extra-cost black anodized finish.

 Ringbrothers, (608) 588-7399, www.ringbrothers.com

 

Welding fixtures

Make welding easier and safer with these magnetic angle fixtures from Lincoln Electric. Part of the company’s Radius Welding Gear product line, the magnetic fixtures can be used to position steel for tack welding, as well as cutting or grinding operations. The three different models are for use on various thicknesses of material, and can positioned at different angles. The magnet can be toggled on or off with a half turn of the knob. Also available is a manual hand lifter for lifting small steel parts or pulling sheets of material, minimizing contact with sharp-edged or hot steel.

Lincoln Electric, (888) 355-3213, www.lincolnelectric.com

 

Banjo steering wheel

Combining styling found on high-end vehicles from the 1930s and ’40s with modern construction, this Banjo-style wheel from GT Performance Products is perfect for today’s customs, street rods or classics. Featuring polished 6061 aluminum spokes and a leather-trimmed spilt rim grip, it is 15½ inches in diameter with a one-inch dish. The leather-covered portion can be removed and dyed to match the rest of the car’s interior. The horn button and polished mounting hub are sold separately. Mounting hubs cover most models of GM cars from 1969-1993, Chevrolet/GMC trucks for 1974-1994, Jeeps from 1976-1995 and all GM ididit steering columns. This wheel cannot be used on vehicles equipped with airbags.

GT Performance, (818) 847-9611, www.gtperformanceproducts.com

 

Oil pumps for Fords

Jon Kaase Racing Engines has introduced an improved version of their oil pump for 429-460ci big-block Fords. The new pump, now made of aluminum (instead of cast iron), retains the sturdy, long section mountings (which were prone to fracturing on stock units), and features the same impeller mechanism found in the company’s 820ci Pro Stock engines. The pump also has dual oil feeds to the rotor to improve idle and high-rpm pressure, and the unit comes complete with all necessary gaskets, ARP mounting studs and 12-point nuts. Two versions are available: a front-sump pump, which features an angled flange at its inlet port, for use in earlier muscle cars; and the more common rear sump pump, which accepts a long pick-up tube and takes its oil feed from the back of the engine. Made in the U.S. and assembled in Kaase’s shop, all pumps are bench tested prior to shipment.

Jon Kaase Racing Engines, (770) 307-0241, www.jonkaaseracingengines.com

 

Modular camshafts

Get the most out of your Ford 4.6L or 5.4L modular V-8 with a new camshaft from Lunati. The company now offers over 30 different profiles for both single overhead cam or double overhead cam models, ranging from a mild 217/225 degree (intake/exhaust) with .450-inch lift to a 241/249 with .550-inch lift. Coverage includes 4.6L and 5.4L two-valve (1991-up), three-valve (2004-up) and four-valve (1993-up) V-8s. All camshafts are made in the U.S. and have a 90-day warranty.

Lunati, (662) 892-1500, www.lunatipower.com

  

Fuel filters

Keep your fuel fresh and clean with these filters from Quick Fuel Technology. Available in two versions – inline or canister – they can be used in both carbureted or fuel injected systems, and are compatible with gasoline, alcohol or E85. Both are made of aircraft grade billet aluminum with a hard anodized finish, sealed with Viton O-rings. The inline filter, designed to fit into tight spaces, comes in three sizes (#8AN, #10AN and #12AN fittings) with either a 10-micron cellulose cartridge or 40-micron stainless steel cartridge. The canister filter is threaded for ½-inch x 14 NPT fittings. Two filter cartridges are available: a 10-micron cellulose or 100-micron stainless steel.

Quick Fuel Technology, (270) 793-0900, www.quickfueltechnology.com

 

C10 suspension

Upgrade the front and rear suspension of a 1963-1972 Chevy C10 pickup with components from RideTech. The front package includes upper and lower Strong Arms; upper mounting brackets; Delrin bushings; monotube shocks; a choice of coilovers or ShockWaves; plus necessary hardware. Out back, there are tubular trailing arms; contoured bolt-on C-notches that strengthen the frame; bolt-on upper crossmembers; an adjustable Panhard bar; and mounting hardware. Front and rear kits are sold separately.

RideTech, (812) 482-2932, www.ridetech.com

 

SRT8 Turbocharger

Give your 2008-2013 Dodge Challenger SRT8 a power boost with the Twin Turbo system available from Granatelli Motor Sports. The system can produce 500 rear wheel horsepower at just five psi of pressure, and 580 to 600 rwhp at eight psi of pressure. While the system is complete, if you want more than eight psi, additional engine modifications are needed (contact the company for details). The kit includes twin 62/66mm turbochargers, twin 38mm TiAL MVS waste gates, a 50mm compressor bypass valve, stainless steel tubing throughout, and all necessary hardware.

Granatelli Motor Sports, (805) 486-6644, www.granatellimotorsports.com

 

Air cleaner nut

Accessorize your Ford’s engine bay with this air cleaner nut from Billet Performance Accessories. CNC machined from 6061 billet aluminum, it fits standard ¼-inch x 20 carburetor threaded studs, and is available in either a polished or anodized finish, with or without the Ford script logo.

Billet Performance Accessories, (507) 263-3808,

www.billetperformanceaccessories.com

 

GT500 damper

ATI Performance Products adds to its product line with a damper for engines in 2007 and newer Shelby GT500s. The 7.81-inch Super Damper is a direct replacement for the stock unit, and features a 10-rib, 10 percent overdrive pulley on the outer shell, as well as a removable OEM-size six-rib accessory pulley. The units dampen torsional crankshaft vibrations through all rpm ranges, and exceed SFI 18.1 safety requirements. The dampers are also fully rebuildable.

ATI Performance Products, (800) 284-3433, www.atiracing.com

 

Z06 badges

Dress up your 2005-2013 Z06 Corvette coupe or convertible and tell the world just what you have under the hood with these badges from American Car Craft. Made in the U.S. from stainless steel, these peel-and-stick badges are laser cut and hand assembled, and can be installed anywhere. The GM licensed product is sold as a four-piece set, they have a highly polished, mirror finish, and feature a red "Z" inlay.

American Car Craft, (727) 861-1500, www.americancarcraft.com

 

Silver coating

If you want the look of a high-end metallic wheel, but are on a budget, then customize your project by using the Hyper Silver kit from Dupli-Color. The two-part system includes two 11-ounce aerosol spray cans: a highly metallic silver base coat, which is then covered by a clear coat that provides both a high gloss finish and protection from brake dust, road grime and chemicals. It is ideal for use on wheels, trim or accessories.

Dupli-Color, (800) 247-3270, www.duplicolor.com 

website comments powered by Disqus