Way Cool New Stuff
By Eric Kaminsky - February 14, 2013 09:54 AM
Mustang wiring harness
When making an engine swap using the 2005-2009 Mustang GT three-valve 4.6L engine, complete your project with a new wiring harness from Ron Francis Wiring. Offered in both panel/telorvek style or wrapped, it is available for both manual and 5R55S automatic transmissions. Kits come complete with everything to hook up factory sensors, ECM (although reprogramming is necessary), electric fans, fuel pump wiring and diagnostic ports, plus detailed instructions.
Ron Francis Wiring
Flex-A-Lite has added to their line of direct fit Flex-a-Fit aluminum radiators with models for 1963-1972 and 1973-1982 Corvettes. Available with either front or side outlets, they are available with or without electric fans. The radiator/fan combination bolts in without drilling or cutting required. The electric fan moves 3,300cfm of air, and comes mounted on the radiator from the factory. Radiators feature a two-row, one-inch all-aluminum core with side tanks hand-welded to patented “T” channels. The company also sells an optional direct-fit transmission cooler kit (shown) for automatic-equipped cars.
Keep the interior of your vehicle cooler and quieter by installing Under Carpet Lite from Boom Mat. The multi-layer composite material measures just ½-inch thick, and is easily installed by mechanical fasteners or with the company’s high-temperature spray adhesive (sold separately). It features three layers of acoustic and thermal insulating material over a base material. It prevents the transfer of noise, rattles and squeaks, and eliminates up to 85 percent of unwanted heat. It is available in four sizes:
24 x 54 inches (nine square feet), 48 x 54 inches (18 sq. ft.),
54 x 72 inches (27 sq. ft.), or in bulk (one linear foot x 54 inches).
Camaro license plate bracket
Man Machine Interface expands its line of patented Aero-Plate front license plate mounting brackets with one for the Gen 5 Camaro. Precision CNC-machined from 6061 T-6 billet aluminum, it comes complete with stainless steel fasteners for durability and corrosion resistance. It mounts to the bottom of the front fascia using factory screw locations, so there are no holes to drill. It can be installed without having to raise the car, and comes in either a black anodized or polished finish.
Man Machine Interface
Eliminate the tranverse leaf springs in your C5 or C6 Corvette by installing these coilovers from MTI Racing. Produced in conjunction with Bilstein, the coilover kit features inverted shock mounting, CNC-machined billet components, resulting in a 50 percent reduction in unsprung weight as well as crisper, more responsive handling. Made in the U.S., the shocks have stainless steel inserts, an anodized finish, custom Aurora spherical bearings, and the ability to make quick ride height adjustments.
’57 Chevy dash panel
Classic Thunder Road expands their product line with a new series of instrument panels for 1957 Chevys. Made from high-quality ABS composite material, the main dash panel is a two-piece assembly that forms a shroud around the steering column; a separate two-gauge cluster mounts on the dash to the right of the main cluster. Available in three finishes (matte black, brushed aluminum or carbon fiber), they come with or without gauges and wiring harness. Buyers have a choice of AutoMeter gauges or the company’s High Velocity or Concours gauges. The main panel houses a speedometer, tachometer, water temperature and oil pressure gauges, while the secondary panel has a fuel gauge and voltmeter.
Classic Thunder Road
Replace a damaged, brittle or malfunctioning wiring harness in your 1974 to 1977 Camaro with this new one from Painless Performance. It has 18 circuits, which will handle all standard factory components, plus allow connections for modern aftermarket accessories. The harnesses follow the same path as factory originals, and utilize factory attachment points. Each harness has a large six-gauge charge wire to handle 125-plus amp alternators. All exterior lights have correct sockets and bulbs pre-installed, and the assembly includes a fully integrated ground circuit.
Brake duct kit
Keep the front brakes on your 2010-2012 Mustang GT cooler with this duct kit from Classic Design Concepts. Designed to be used in conjunction with the company’s chin spoiler, the kit include four ABS ducts feeding air through 2½-inch tubes onto the surface of the front brake rotors. No drilling is required for installation, and it does not require relocating the windshield washer fluid reservoir.
Classic Design Concepts
Hotchkis Sports Suspension is now offering racing-inspired cast aluminum wheels for late model GM, Chrysler and Ford muscle cars. Three different styles are available: H-Sport (a multi-spoke design available in Gloss Silver or Matte Black), S-Sport (a double five-spoke design, available in Gloss Silver or Matte Black with machine polished accents), and Y-Sport (available in a Matte Graphite finish or machine polished face with Matte Graphite accents). All come in 20-inch diameters, with the H-Sport and S-Sport wheels being 8½ inches wide for the front and 9½ inches wide for the rear, while the Y-Sport is nine inches wide in front and 10 inches wide for the rear. They are designed to fit factory and aftermarket tires, and clear factory and aftermarket big brake kits.
Hotchkis Sports Suspension
Submit your new products to Amos Auto Enthusiast.
Send a press release and high-resolution color image via e-mail to: firstname.lastname@example.org
Please put “new product release” in the subject line.